Ro-ràdh tricone bits
Is e TCI tricone bit am pìos drile as mòr-chòrdte san t-saoghal, faodar a chleachdadh gu farsaing airson raointean ola & gas, drileadh tobar uisge agus sgrùdadh geòlais.
Faodaidh an IADC bho 417 gu 837 coinneachadh ris an drileadh cruthachaidh eadar-dhealachaidh agad.
Cuideachd faodaidh tu innse dhuinn do chruth drileadh, is urrainn dhuinn moladh proifeasanta a thoirt seachad air an tricone bit IADC.
Tha pìosan tricone drile an ear air an dealbhadh agus air an dèanamh a rèir inbhe API & ISO a tha nam feartan beatha fhada, èifeachdas drileadh àrd agus cosgais obrachaidh ìosal.
Aig an àm seo, is urrainn dhuinn meudan beaga a dhèanamh eadar 2 7/8" gu 26" agus faodar an cur an sàs ann an diofar chruthan bho bhog gu cruaidh.
Stiùireadh air Tricone Bit Choice
| IADC | WOB(KN/mm) | RPM(r/mion) | FOIRMEACHAS IOMPAICHTE |
| 114/116/117 | 0.3~0.75 | 180~60 | Cruthan gu math bog le neart teannachaidh ìosal agus comas drile àrd, leithid crèadh, clach-eabar, cailc, msaa. |
| 124/126/127 | 0.3~0.85 | 180~60 | Cruthan bog le neart teannachaidh ìosal agus comas drile àrd, leithid clach-eabar, gypsum, salann, clach-aoil bhog, msaa. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Cruthan bog gu meadhanach le neart teannachaidh ìosal agus comas drile àrd, leithid clach-ghuail bog meadhanach, gypsum cruaidh, clach-aoil bog meadhanach, clach-ghainmhich meadhanach bog, cruthachadh bog le eadar-aghaidh nas cruaidhe, msaa. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Cruthan meadhanach le neart teannachaidh àrd, leithid clach-ghuail bog meadhanach, gypsum cruaidh, clach-aoil bog meadhanach, clach-ghainmhich meadhanach bog, cruthachadh bog le eadar-aghaidh nas cruaidhe, msaa. |
| 227 | 0.35~0.95 | 150~50 | Cruthan cruaidh meadhanach le neart teannachaidh àrd, leithid clach-ghràin sgrìobach, clach-aoil, clach-ghainmhich, dolomite, gypsum cruaidh, marmor, msaa. |
| Nota: Cha bu chòir na crìochan as àirde de WOB agus RPM sa chlàr gu h-àrd a chleachdadh aig an aon àm. | |||
Stiùireadh air roghainn tricone BitsSeòrsa fiacail Tricone Bits
Meud nam pìosan
| Meud Bit | API REG PIN | Torc | Cuideam | |
| òirleach | mm | òirleach | KN.M | kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40,5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Pròiseas Riochdachaidh
| Meud Òrdugh as ìsle | Chan eil |
| Prìs | |
| Mion-fhiosrachadh pacaidh | Pasgan lìbhrigidh àbhaisteach às-mhalairt |
| Ùine Lìbhrigeadh | 7 làithean |
| Teirmean pàighidh | T/T |
| Comas Solarachaidh | Stèidhichte air òrdugh mionaideach |
